AR nXt Revit - Filtering of objects Needs work

I am working on  a remodeling and addition project. 

I used the design option feature within Revit and also the phasing.

In the case of Phasing:

1.  If I demo a door in an existing wall and insert a window in its place as a part of a later phase such as new construction, the original door, the new window and the portion of the wall that filled in the door opening are all rendered. 

2.  If I insert a window (new construction phase) in wall (existing phase), the original wall and the window are both rendered. The result is that the projected trim of the window appears to be applied to the existing wall. The opening is not properly interpreted.

In the case of Design Options:

1.  Both options are rendered, rather than the primary option.

I developed a work around, but it requires that I work on a separate Revit for the purposes of creating the rendering.  UGH!!  Not the best.

Views: 33


You need to be a member of Render Plus Software to add comments!

Join Render Plus Software


Render Plus created this Ning Network.


Enter a phrase here to search the entire Render Plus web site:



© 2023   Created by Render Plus.   Powered by

Badges  |  Report an Issue  |  Terms of Service