Edges showing up white

Vova P. September 6, 2015 at 8:37pm

Much better! Please also check the way for 3JS output type, it still without edges.

Rich Hart September 2, 2015 at 5:44pm

Send me the model and I'll see if I can duplicate the problem here. Just send it to:

rich.hart@renderplus.com

or upload it to us:

http://www.renderplus.com/wp2/uploads/

John Cates September 2, 2015 at 5:39pm

hi Rich - I now am using O102. If I use a simple extruded rectangle model, everything works fine, including edge thicknesses of less the 1.0 But, I'm working with a large model and if I leave Edge Lines at none, the PDF works fine, complete with the navigation toolbar at the top (snapshot attached). If I change the Edge Lines to "ALL', with any thickness, the PDF is created but the navigation toolbar disappears and navigating with the mouse is not possible.

No edges.JPG

With edges.JPG

Rich Hart September 2, 2015 at 1:01pm

I posted a new version, OI02, which uses edge line thickness properly again. You can now set it to be less than 1.0, or a number like 1.3 again.

You can download it from our downloads page,

http://www.renderplus.com/wp2/download/

or get it directly from this link:

http://www.renderplus.com/downloads/3D_PDF/3D_PDF_3_OI02.zip

Rich Hart September 2, 2015 at 11:34am

I will have to make you a new version to fix this.

The edge line size logic is currently rounding down to an integer, so 0.9 becomes 0.

John Cates said:

Hi Rich - I'm still struggling with my line widths. In a simple model, if I set the Edge Lines to anything under 1.0, they do not show up in the PDF. Above 1.0 and they show up fine. This is ok but some of my models are big and detailed and the heavy lines are too much. I am on OH3p 6.0 and Sketchup 2015

John Cates September 2, 2015 at 10:40am

Hi Rich - I'm still struggling with my line widths. In a simple model, if I set the Edge Lines to anything under 1.0, they do not show up in the PDF. Above 1.0 and they show up fine. This is ok but some of my models are big and detailed and the heavy lines are too much. I am on OH3p 6.0 and Sketchup 2015

Rich Hart August 31, 2015 at 8:41am

We posted a new version with a fix for this:

http://www.renderplus.com/php/download_links.php

Direct link to latest version, OH31:

http://www.renderplus.com/downloads/3D_PDF/3D_PDF_3_OH31.zip

John Cates August 28, 2015 at 10:09am

Rich, I don't even know what RPC is... Or Archvision. I tried a simple model with only an extruded rectangle and got the same error.

Thanks for your help with this

Rich Hart August 28, 2015 at 9:32am

Oops. I'll fix that and repost it.

Were there RPC objects in your model?

John Cates August 28, 2015 at 9:22am

Hi Rich - I installed the update and now get this message when I try to make a PDF.

I received this Error message while running RPS 3D PDF Version: OH28p 6.0

Error: Unable to ArchVision DashBoard.

Cannot start process: \Dashboard.exe

(Error occurred in ..\rps\rps_std.cpp line: 9569)

     #Date: '08/28/2015 13:18:57 US Mountain Standard Time'
     #License: 'PDOH10041I'
     #Computer: 'JOHN-HP'
     #Product: 'RPS 3D PDF'
     #Version: 'OH28p 6.0'
     #Build: 'OH28p Friday, August 28, 2015'
     #Base: 'Rp3dPdf'
     #Company: 'LineWork Architectural Design & Illustration'
     #Phone: '480-388-0992'
     #User: 'John Cates'
     #Email: 'john@lineworkadi.com'
     #Owner: 'John'
     #TL: 'rpr'
     #TC: 'rpr'
     #VC: '11'
     #Windows: 'Windows 7 Build: 7601 Service Pack 1'

Capture.JPG

Forum

Edges showing up white

Replies