pls comment on this post sir

is there possible tricks to improve the quality of my rendering sir most probably on the ceiling i want it more accurate same as real even the color of ceiling is white edges ar not define as a wanted pls help

thanks gil 

Attachments:

RESTO DINING STRIP - table - 2.jpg, 461 KB

▶ Reply to This

Replies to This Discussion

Permalink Reply by giltmamucud on May 17, 2012 at 12:37am

pls help me out of it sir

mostly on ceiling

Attachments:

RESTO DINING STRIP - table - 3.jpg, 477 KB
VIP 4.jpg, 481 KB

▶ Reply

Permalink Reply by giltmamucud on May 17, 2012 at 12:46am

this my setting for this render sir

Attachments:

Untitled.jpg, 121 KB

▶ Reply

Permalink Reply by Render Plus on May 17, 2012 at 8:15am

Have you tried using the brightness slider to make the scene brighter?

I presume you have selected the "Interior no sun" preset to make sure that indiret lighting is enabled?

You have a light of lights. Be sure to let it render for 100 passes or more to make sure that the lights are all on and that they have a chance to reflect properly.

One thing you can try to increase the brightness of the ceiling is to add "self glow" to the ceiling material itself. If you use this carefully, you can increase the whiteness of the ceiling.

▶ Reply

Permalink Reply by giltmamucud on May 17, 2012 at 8:24am

yes i have tried this brightness slide bar and i use interior with sun aparently i used the default passes which is 5 how about this render image size i customized it as x=1418 y=600 it takes 20 t0 33 mins of rendering is it normal sir

▶ Reply

Permalink Reply by Render Plus on May 17, 2012 at 11:26am

A model with this many lights will take longer to render per pass, and also require more passes.

Unless you have windows or doors letting in light from the outside, you should "Interior No Sun" instead of "Interior with Sun". But that won't make much difference here.

Here is an article on "White Walls" which probably also applies to whiter ceilings:

http://www.renderplus.com/wk/White_Walls_w.htm

▶ Reply

Permalink Reply by giltmamucud on May 17, 2012 at 11:54pm

tnx ok then ill try but 0ne more thing about this render image size as u have said earlier i customized mu x is 1418 y is 600 is it possible to render it small to be fast and make it larger image that it wont affect the quality?

▶ Reply

Permalink Reply by Render Plus on May 18, 2012 at 9:49am

You can make it smaller while you are getting your settings right (600 x 250 will be 5 times faster when rendering) But you will need to render at full size for the best quality for your final rendering.

▶ Reply

Permalink Reply by giltmamucud on May 26, 2012 at 11:29pm

OK SIR TNX I GOT THIS SELF GLOW IMPACT ALREADY AND IVE TRIED IT COOL. BUT ONE MORE THING SIR THIS SELF GLOW SET AS ONE CHANEL ONLY UNLIKE THIS LIGHTS YOU CAN SET INDIVIDUAL SETTINGS.