Reflection

Replies to This Discussion

Permalink Reply by Roger Fröderberg on April 11, 2013 at 7:42am

Should be in Ariel Vision for sketchup!

• ▶ Reply

Permalink Reply by Rich Hart on April 11, 2013 at 8:44am

Can you post a little sample model where this happens, along with the steps to reproduce it?

If you zip a .skp file, you can attach it in a reply using Upload Files.

• ▶ Reply

Permalink Reply by Roger Fröderberg on April 12, 2013 at 5:26am

Will try but first look at the difference on the image. Both objekts has the same color (Color_006) with Reflection set to 30. If i render the left objekt or both at the same time there will be no reflection but if i render the right objekt alone it looks fine.

Is there someway i can reset all colors and start from the beginning? 

• ▶ Reply

Permalink Reply by Rich Hart on April 12, 2013 at 4:13pm

I can see the difference.

It would really help to have the model so I could watch it happen here.

• ▶ Reply

Permalink Reply by Roger Fröderberg on April 14, 2013 at 11:55pm

Ok, here it is.

Thanks.

• ▶ Reply

Permalink Reply by Roger Fröderberg on April 15, 2013 at 12:15am

I would send you the file if it was possible? Something wrong with the forum though..

• ▶ Reply

Permalink Reply by Roger Fröderberg on April 15, 2013 at 5:29am

Trying again...

Attachments:

• Glossy valve.zip, 95 KB

• ▶ Reply

Permalink Reply by Rich Hart on April 15, 2013 at 8:30am

Got it, Thanks.

We'll see what's causing this.

• ▶ Reply

Permalink Reply by Rich Hart on April 17, 2013 at 1:53pm

This was caused by a material that had an attribute on it from another rending program that was interfering with our reflection settings.

We posted a fix for this, version MD17.

Please download and try that:

http://www.renderplus.com/php/download_links.php

• ▶ Reply

Permalink Reply by Roger Fröderberg on April 18, 2013 at 1:10am

Ok, thanks alot!

Is it possible to reset all attributes on a drawing?

Do i have to buy the fix?

• ▶ Reply

Permalink Reply by Rich Hart on April 18, 2013 at 11:10am

I do not know a way to reset or remove all the attributes for everything in the drawing.

If your license was purchased more that 12 months ago, then you would need to purchase a renewal to get the fix.

Otherwise, you can just download and install the latest version from:

http://www.arielvision.com/download/

• ▶ Reply

▶ Reply to Discussion